Inconel 625 | Alloy 625 Round Bar | AMS 5666 | Sheet | Plate | Tube | Pipe

Shapes Available

  • Coil
  • Pipe
  • Plate
  • Round Bar
  • Sheet
  • Tubing

Industries

  • Aerospace
  • Manufacturing
  • Oil Refining

Material

  • Exotic
  • Specialty Steel

Specifications

  • AMS 5581
  • AMS 5599
  • AMS 5666
  • ASTM B446

Applications

  • Titanium Dioxide Plants
  • Vacuum furnace fixtures

Features

  • Good Caustic Corrosion Resistance
  • Oxidation Resistance to 2000°F
  • Virtually Immune to Chloride Ion Stress Corrosion Cracking

Inconel 625 is an austenitic nickel-base super-alloy  with excellent corrosion and oxidation resistance. The solid solution strengthening of columbium and molybdenum in the nickel-chromium matrix gives this alloy excellent strength and toughness. Alloy 625 is non-magnetic and can be used for parts that require both oxidation and corrosion resistance up to 2000° F. Inconel 625 has a wide array of applications but preforms well in marine environments, hot sections of jet engines and corrosive, high temperature chemical processing atmospheres.

The strength of  625 comes from a stiffening effect of the niobium and molybdenum on its nickel-chromium matrix, thus PH treatments aren’t required. The combination of these elements form a superior resistance to a variety of corrosive environments of a rather unusual severity in addition to high temperature effects like oxidation and carburization.

Inconel 625 is an appropriate selection for sea water applications, it’s also good for mooring cables and propeller blades, motors, utility boats, undersea communication cables, springs, seals and other types of marine applications.

Want more information about Alloy 625 or when sold by Special Metals “Inconel 625”? Look no further, here’s a video we did about 625.

Inconel 625 comes in a variety of shapes including, but not limited to: round bar, plate, sheet, pipe, tubing and coil. Are you looking for where to buy 625? Can’t find who sells Inconel 625? Look no further, at Michlin Metals we supply all types of Inconel, not just 625. We also supply 600, 718, 800, and 825. Michlin has recently made a video on Inconel – check out the transcript here. Watch below:


Please contact us to request a quote. We specialize in hard to find material.

We work closely with many manufacturers in the aerospace & defense industry. We work with NADCAP approved heat treaters and testing laboratories. We can supply DFARS compliant material.

Chemical Composition
ElementMinMax
Al- 0.40
C- 0.10
Co- 1.0
Cr20.0 23.0
Fe- 5.0
Mn- 0.50
Mo8.0 10.0
Nb3.14 4.15 *(includes Ta)
Ni58.0
P- 0.015
S- 0.015
Si- 0.50
Ti- 0.40
Go to Top