PRODUCTS AND SERVICES

STAINLESS STEEL

Grades: • 302 • 303 • 303s • 303se • 304/304L • 309 • 310 • 316/316L • 317 • 317L • 321 • 347 • 410 • 416 • 420 • 430 • 440A • 440C • 440F Se • 455 • Duplex 2205 • Stocked as annealed: 13-8, 15-5, 17-4, 17-7 - Furnished in the following conditions: H900, H925, H1000, H1025, H1050, H1075, H1100 and H1150

STAINLESS STEEL CHEMICAL ANALYSES
(Maximum unless Indicated)

Aerospace, ASTM, Federal & Military Specifications
For Reference Only! Not for use for design or specifications

Type	Carbon	Manganese	Silicon	Phosphorus	Sulpher	Chrome	Molybdenum	Nickel	Copper	Others	Magnetic/Non-Magnetic
PH-13-8MO	.05	.10	.10	.01	.008	12.25/ 13.25	2./2.5	7.5/8.5		Al.90/1.35 N.01	M
15-5 PH	.07	1.0	1.0	.03	.015	14./15.5	.50	3.5/5.5	2.5/4.5	Cb 5xC/.45 Ta .05	M
17-4 PH	.07	1.0	1.0	.04	.03	15./17.5	.50	3./5.	3./5.	Cb 5xC/.45	M
17-7 PH	.09	1.0	1.0	.04	.03	16./18.		6.5/7.75		Al .75/1.5	M
Custom 455	.03	.50	.50	.015	.015	11./12.5	.50	7.5/9.5	1.5/2.5	Cb .50 Ti .90/1.4 N .015	M
302	.12	2.0	1.0	.04	.03	17./19.	.75.	8./10.	.50	N .10	NM
303 S	.12	2.0	1.0	.15	.15/.35	17./19.	.60	8./0.	.50	P+S .18 min	NM
303 SE	.12	2.0	.70	.12/.17	.04	17./19.	.60	8./10.		Se .15/.30	NM
304	.08	2.0	1.0	.04	.03	18./20.	1.00	8./10.5	1.00	N .10	NM
304 L	.03	2.0	1.0	.04	.03	18./20.	1.00	8./11.	1.00	N .10	NM
309	.08	2.0	1.0	.04	.03	22./24.	.75	12./15.	.75		NM
310	.08	2.0	.3/.8	.04	.03	24./26.	.75	19./22.	.75		NM
316	.08	1.25/2.	1.0	.04	.03	16./18.	2./3.	10./14.	.50	N .10	NM
316 L	.03	1.25/2.	1.0	.04	.03	16./18.	2./3.	10./14.	1.00	N .10	NM
317	.08	2.0	1.0	.045	.03	18./20.	3./4.	11./15.	1.00	N .10	NM
317 L	.03	2.0	1.0	.045	.03	18./20.	3./4.	11./15.			NM
321	.04/.08	2.0	1.0	.04	.03	17./19.	.75	8./12.	.75	Ti 5x (C + N)/70	NM
347	.04/.08	2.0	1.0	.04	.03	17./19.	.75	9./12.	.75	Cb 10xC/1.10 Co 1.0 Ta .05	NM
410	.12/.15	.60	.50	.025	.025	11.5/12.5	.50	.75	.50	Al .05 Sn .05 N .08	M
416	.15	1.25	1.0	.06	.15/.40	11.5/13.5	.60	.75	.50		M
420	.30/.40	1.0	1.0	.04	.03	12./14.	.50	.50	.50	Al .05 Sn .05	M
430	.12	1.0	1.0	.04	.03	16./18.	.50	.75	.50	Al .05 Sn .05	M
440 A	.60/.75	1.0	1.0	.04	.03	16./18.	.75	.75	.50		M
440 C	.95/1.2	1.0	1.0	.02	.01	16./18.	.40/.65	.75	.50		M
440 F Se	.95/1.2	1.25	1.0	.04	.03	16./18.	.40/.60	.50	.60	Sn .05 N .08 Se .15/.25	M
Nitronic 40	.04	8./10.	1.0	.045	.03	19./21.5	.75	5.5/7.5	.75	N .15/.40	NM
Nitronic 50	.06	4./6.	1.0	.04	.03	20.5/23.5	1.5/3.0	11.5/13.5		N .20/.40 Cb .10/.30 Al .02 V .10/.30 Ti .02 Zr .02	NM
Nitronic 60	.10	7./9.	3.5/4.5			16./18.		8.0/9.0		N .08/.18	NM

BRASS, COPPER, BRONZE

Grades: • 110 • 145 • 147 • 314 •316 • 345 • 353 • 356 • 360 • 464 • 482 • 485 • 510 • 521 • 524 • 544 • 600 • 602 • 604 • 605 • 630 •642 • 651 • 655 • 673 • 674 • 675 • 676 • 694 • 697 • 792 • 798 • 932 (660) • 954 • Cupro Nickel 70-30 • Cupro Nickel 90-10

ALUMINUM

Grades: • 1100 • 2011 • 2014 • 2017 • 2024 • 2219 • 3003 • 5005 • 5052 • 5083 • 6061 • 6063 • 6262 • 7075 • Most tempers available

COLD FINISHED AND ALLOY

Grades: • 1005 • 1010 • 1018 • 1045 • 12L14 • 1215 • 1117 • 11L17 • 1137 • 11L37 • 1141 • 11L41 • 1144 • 1144L • 4130 • 4140 • 4140L • 4145 • 4150 • 4340 • 4340V • 8620 • 8620L • 9310 • 9310V • 52100

SPECIALTY STEEL, EXOTICS

Grades: • A-286 • Hastelloy • Inconel • Monel • Waspaloy • Invar • Kovar • Titanium • Tungsten • AERMET • Maraging 300 • Inconel 600 • Inconel 625 • Inconel 718 • Inconel 800 • Inconel 825 • L-605 • Monel 400 • Monel 405 • Monel 500 • Nickel 200 • Nickel 201 • Nitronic 40 • Nitronic 50 • Nitronic 60 • Tungsten • Hastelloy X • Hastelloy X -750 • Hastelloy C-276 • Kovar ASTM F 15 Alloy • Alloy 45 • 46 • 47 • 48 • 49 • 52 • Invar Alloy 36 • 42 • Titanium 6 AL 4V / ELI • AERMET 100 • Maraging 200 • Maraging 250 • ph grades can be furnished in the following conditions.

SUPER ALLOYS: Electrical Steels
(Maximum unless Indicated)

Aerospace, ASTM, Federal & Military Specifications
For Reference Only! Not for use for design or specifications

Type	Carbon	Manganese	Silicon	Phosphorus	Sulpher	Chrome	Molybdenum	Nickel	Copper	Others	Magnetic/Non-Magnetic
Maraging "300"	.03	.10	.10	.01	.01	.50	4.6/5.2	18./19.		Co 8.5/9.5 Ti .50/.80 Al .05/.15 B.003 Zr .02	M
INVAR-36 "FM"	.15	1.0	.35					35./36.5		Se .15/.25 Fe Bal	M
A-286	.08	2.0	1.0	.025	.025	13.5/16.0	1./1.5	24./27.	.50	Ti 1.90/2.35 V .10/.50 Al .35 B.001/.01 Co 1.0	NM
4750	.035	.80	.50	.02	.008			47./50.		Bal. Fe	M
L-605	.05/.15	1.0/2.0	.40	.04	.03	19./21.		9./11.		W 14./16. Fe 3.0 Bal Co	NM
Nickel 200	.15	.35	.35		.01			99. Min	.25	Fe .40	M
Nickel 400	.20	2.0	.50	.02	.015			63. Min	.28/.34	Ni + Co 63. Min Co 1.0 Al .50 Pb .006 Zn .02 Sn .006 Fe 2.5	INQUIRE
Nickel 405	.30	2.0	.50	.02	.025/.060			63./70.	28./34.	Co 1.0 Al .50 Pb .006 Zn .02 Sn .006 Fe 2.5	INQUIRE
Nickel K-500	.17	1.5	.50	.02	.01			63. Min	27./33.	Al 2.30/3.15 Co 1.0 Ti .35/.85 Sn .006 Fe 2.0 Pb .006 Zn .02	INQUIRE
Nickel 600	.15	1.0	.50		.015	14./17.	.50	72. Min	.50	Al .35 Ti .50 Cb 1.0 Fe 6./10. Co 1.0 Ta .05	NM
Nickel 625	.10	.50	.50	.15	.015	20./23.	8./10.	58. Min		Al .40 Ti .40 Co 1.0 Cb 3.15/4.15 Fe 5.0 Ta .05	NM
718	.08	.35	.35	.015	.015	17./21.	2.8/3.3	50./55.	.30	Cb 4.75/5.5 Ta.05 Pb .005 Co 1.0 Bi .00003 Se .0003 Ti .65/1.15 B .006 Al .20/.80 Fe Bal	NM
X-750	.08	1.0	.50		.01	14./17.		Ni + Co 70. Min	.50	Co 1.0 Cb .70/1.2 Ti 2.25/2.75 Ta .05 Al .40/1.0 Fe 5./9.	NM
800	.10	1.5	1.0		.015	19./23.		30./35.	0.75	Al .15/.60 Ti .15/.60 Fe 39.5 min	NM
825	.05	1.0	.50		.03	19.5/23.5	2.5/3.5	38./46.	1.5/3.0	Ti .60/1.20 Al .20 Fe 22.0 min	NM
Waspaloy	.02/.10	.10	.15	.015	.015	18./21.	3.5/5.0	Balance	.10	Co 12./15. Pb.0005 Ti 2.75/3.25 Bi .00003 Al 1.2/1.6 Zr .02/.08 Se .0003 B .003/.01 Fe 2. Ti 1.0	NM
Kovar	.04	.50	.20			.20	.20	29.0	.20	Co. 17.0 Mg.10 Fe Bal Al .10 Ti .10 Zr .10 Ti + Al + Mg + Zr .20	M
Maraging 200	.03	.10	.10	.01	.01	.50	3.25	18./19.		Co 8.5 Ti .20 Al .05/.15 B.003 Zr .01	M
Maraging 250	.03	.10	.10	.01	.01	.50	4.8	18./19.		Co 7.5 Ti .40 Al .05/.15 B.003 Zr .01	M
AERMET 100	.21/.25	.10	.10	.008	.005	2.9/3.3	1.1/1.3	11/12		Co 13./14. Ti .015 Al .015 P + S .01 N .0015 O2 .002	M
Hastelloy C-276	.001	1.0	.08			16.0	16.0	57.0		Fe 5.0, W 4.0, Co 2.5, V .35	INQUIRE
Hastelloy X	.1	1.0	1.0			22.0	9.0	47		Fe 18.0 Co 1.5 W .6 B .008	INQUIRE

ITEM	SIZE	WT
2.25" RD 6AL 4V ELI	5.375”	4.3#
2.25" RD 6AL 4V ELI	12.125”	9.7#
2.25" RD 6AL 4V ELI	17.625”	14.10#
2.25" RD 6AL 4V ELI	16.5”	13.2#
2.25" RD 6AL 4V ELI	17.6875”	14.15#
2.25" RD 6AL 4V ELI	17.75”	14.2#
2.25" RD 6AL 4V ELI	17.9375”	14.3#
2.25" RD 6AL 4V ELI	18.0”	14.4#
2.25" RD 6AL 4V ELI	18.125”	14.5#
2.25" RD 6AL 4V ELI	18.6875”	14.95#
2.25" RD 6AL 4V ELI	18.8125”	15.05#
2.25" RD 6AL 4V ELI	9.875”	7.9#
2.25" RD 6AL 4V ELI	18.75”	15#
2.25" RD 6AL 4V ELI	15.6875”	12.5#
2.25" RD 6AL 4V ELI	13.250”	10.6#
2.25" RD 6AL 4V ELI	12.375”	9.9#
2.25" RD 6AL 4V ELI	17.9375”	14.3#
2.25" RD 6AL 4V ELI	26”	20.8#

Shapes

• Round • Hex • Square • Flat • Angle • Channels • Pipe • Tube • Sheet • Coil • Plate • Wire

ADDITIONAL SERVICES

• Turning or grinding to your desired diameter and microfinish.

• Heat treating and machine straightening of bars.

• Polish and PVC.

• Drawing to length or diameter.

GENERAL INFO

Please contact us to request a quote. We specialize in locating the "hard to find" material.

We work closely with many manufacturers in the aerospace/defense industry. We work with NADCAP approved heat treaters and testing laboratories. We can supply DFARS compliant material.

When other service centers say NO,
Try Michlin Metals

Michlin Metals, Inc. (MMI) specializes in supplying “hard to find” material. We work closely with many manufacturers in the aerospace/defense industry.
We work with NADCAP approved heat treaters and testing laboratories. We also can supply DFARS compliant material.

DISCLAIMER: The information provided on this Web site, technical or otherwise, is merely for informational purposes, and is not intended to serve as a guide, manual, instructions, or any kind reference for proper safety procedures or material purchasing. Michlin Metals makes no warranty, express or implied, based on the statements on this Web site and, as such, will not be liable for any damages, either direct or indirect, including but not limited to consequential damages, such as damages for loss of profits, that may arise based on reliance on the information provided on this Web site.